Category Archives: making things

New Hampshire Media Makers Spoke Card 1

Posted on by

Rewards drive behavior.

*

*

*

As regular readers know, I’m trying to re-integrate bicycling into my life as an enjoyable, practical transportation option. Given the ongoing nightmare in the Gulf, I’m feeling pretty evangelical about biking, so I thought I’d see if I could encourage locals (or folks from a distance, if they’re up for a big ride) to come to this Sunday’s NHMM meetup via bicycle. I was inspired when I fell across spoke cards while looking at commuter bikes on Flickr – you can see the results of said inspiration above.

The first 8 people to ride to NHMM get a spoke card on the spot – if there are more riders than that, I’ll have more made up and make good on my offer within a week. If there are less than that, anyone from further away than, say, 20 miles can have one if they tell me that they’ve ridden a bike to and from the grocery store this week (6/6) – knowing my own problems with good intentions, it’s gotta be a completed ride.

A shoutout to the good folks at Infinite Imaging who did a bang-up job on printing and lamination.

Low and Slow

Posted on by

-or-

Reduce, re-use, recycle

*

The title of the post comes from a zine published back in the early 70s (called -anyone? anyone?- Low and Slow) covering the wild world of hang gliding. How wild? Folks were making gliders out of Visqueen and bamboo. I mailed off for a copy – because I wanted to build one – sadly, it’s long gone, though a post here suggests I can reread all the Low and Slows on a DVD. Enough of all that – the point of the post: my bike racing (venue = triathlons) days are done – I’ve found myself wanting a bike I can just jump on and ride (comfortably). My fast but twitchy road bike does not exactly fit the bill. My old mountain bike, however…

So, let the conversion to two-wheeled Vista Cruiser begin! IMHO, there are 2 things that determine 90% of overall bike ‘feel’: frame geometry and tires. You’re not going to do much about frame geometry – about the only thing you can alter is the front fork and that costs $$$. Tires can make a surprising difference and unless you’re racing (in which case, why aren’t you running tubulars?) fatter ones than current fashion dictates are what I suggest. Here’s the bike – after the pic I’ll run through current and planned mods.

*

‘Fatter tires’ is relative – although they’re much thinner than the knobbies that I took off, these are fat road rubber. They’re Kenda Kwests (the 100psi variety) – a nice balance of volume and low rolling resistance. I also mounted a rear rack and put on new, longer grips – I like riding with my hands close together, as if I’m up on the flats on a drop bar. The shakedown ride today was a success – the bike rode like a dream.

I haven’t decided whether to move pedals over from the road bike to this beastie – I’m leaning towards yes. The road bike’s saddle will probably come over at the same time. After that, the next order of business will be handlebars. I have an On One Midge ready and waiting, but because road handlebars are not the same diameter as mountain bars I need to replace the brake levers (not too $$, and I wanted to do it anyway) and swap the thumb shifters for barcons ($$$, and though I LOVE bar-cons, I would have made do).  The other short-term priority are shopping bag panniers – the grocery store is within easy biking distance – ’nuff said.

Down the road a bit, I’d like to tweak the drive train a bit. I don’t know whether the chain stay will accommodate a significantly larger middle chainring, but if it will I’ve always been partial to half-step setups – with the triple it’d be a half-step plus granny (and contra Mr. Brown, I’ve used a half-step setup successfully).

Way down the road I’m thinking about fenders, lighting, a front rack – part of me says that I should just save my pennies for a Velo-Orange frame (or something similar) and build up a baguette hauler around it. We’ll see. First order of business is to re-integrate ‘just hopping on the bike’ into my life.

Update – the saddle and pedal switch happened this morning, before a second shakedown run (pics from which will be posted later today).

Big brass faux rivets!

Nick Cave (no, not that one)

Posted on by

Amazing Soundsuits by Chicago-based sculptor/fiber artist/genius Nick Cave. Found by following an inbound link (to Tibetan Pop Surrealism) back and then googling like mad.

*

*

*

*

*

Youtube of suits under construction/dancing etc.:

*

Molly Would blogs Mr. Cave’s visit to SCAD.

*

A slide show from the Fowler Museum, UCLA (hopefully, the link works well – the Fowler/phototour is a bit tricksy – if it doesn’t work, click on the Fowler link, then on Nick Cave Photo Tour).

8-bit

Posted on by

Like LOLCats were, internet centuries ago, 8-bit is everywhere and it’s fun.


PIXELS by PATRICK JEAN.
Uploaded by onemoreprod. – Watch original web videos.

After 1:48, all I can think of is ice-nine.

*

*

Much the same as 1st video, but with music!

*

rstevens has been having pixelfun since before everything (this strip is esp. for Sy, the ladies and the cassowary).

Finding Ada 2010 – Angela Sheehan

Posted on by

I first met Angela at a New Hampshire Media Makers meetup back in August 2009. During her three minute ‘here’s what I’m up to’ presentation she spoke of her interest in wearable tech: fabric/electronic mashups. I’m interested in any kind of computing/networking/digital tech that doesn’t involve a screen, keyboard and beige box; we said hello and struck up a conversation. Later in the week, she sent me links to work – REACTIVEfashion – she’d done (with Rebecca Grabman) as a senior at Bennington:

Interactive Formalwear.

*

Tween Voodoo.

*

Skate Power.

*

Wow, said I.

Before we get to what Angela has been up to recently, a few words on the path she took into Making. She went to Bennington intending to paint and do illustration, but ended up in a 3D animation class. When the person teaching 3D animation left, that program was essentially done (perils of small colleges). Not to worry – Angela jumped into Robert Ransick’s Viral Media class, from there, on to Physical Computing. Her timing was perfect – Leah Beuchley was off and running on her pioneering work, the Arduino folks had produced their platform (since adapted/adopted into the wearable-friendly Lilypad) – there was a lot of fun and ferment around wearables. Her interest in physical computing led to the work above, which was presented in a couple different venues – including a runway show, and to a class that I have to mention because the title is so great: Experiments in Mixed Reality (incidentally, structured around rapid prototyping cycles).

Since I met her last fall, Angela has been producing great work at an amazing clip:

I’m probably missing a couple, too. Going forward, I’ve heard rumblings that she’s coordinating flash-mob fun (including interactive tech) with Tara Sullivan (organizer of the Portsmouth Thriller Dance last Halloween) and know for sure that she’s looking into makerspace possibilities here on the seacoast. Especially with the flash-mob planning, it seems that she’s exploring some of the group dynamics/interaction themes that were central to at least one of the rapid-prototype projects she’s described to me.

Why Angela Sheehan on Ada Lovelace Day? She epitomizes, for me, many of the best aspects of Maker kulturny. She mashes up things she’s skilled at with things she’s figuring out and isn’t daunted by ‘I’ve never done that before’. If it’s something she wants to know, she learns it; if it’s less intriguing, she’ll get help. She pulls stuff apart and repurposes components in service to her projects. Alongside the uber-maker thing is her creativity – Angela just has a ton of cool ideas, many of which involve technology (important for the whole Lovelace thing!). Three cheers for Ada Lovelace and three cheers for Angela Sheehan.

[Side note – you can find Angela’s chinchilla related work at The Fuzz Depot.]

West African Stream Tank Re-do

Posted on by

In this case, at least, plastic needlepoint mesh has shown itself to be a suck substrate for Java moss. After seven months of very little progress, I decided to re-do the back wall of my West African stream tank. I ordered a random selection of driftood from AES and picked up a couple pieces of red lava rock.

Layout:

The masked-off section to the left is space that needs to stay free for the filter plenum.

*

Foamed in (hooray for Handi-Foam!):

*

Detail – with placeholder hose section – of where the water will return to the tank, producing a nice waterfall/drip wall.

*

The waterfall in action with unidentified W. African fern, Bolbitis heudelotii and Anubias:

*

More Anubias, some African begonia and an Aeranges biloba:

*

The tank looks 100% better and I think it’ll only improve as the begonia grows in and covers everything – I’ll post some pix once things start to grow.